Grande Blunt Satin Nickel
GRANDE BLUNT is generously oversized knob, perfect as an appliance pull and large drawers, cabinets and closets. This piece also works beautifully as a door pull. Pairs dynamically with the different sizes in the BLUNT range as well as a perfect compliment to our other styles when you need a bigger sturdy piece. The Satin Nickel plate has a warm tone and a smooth satin matte finish.
Living Finishes
All our finishes are living finishes. Uncoated by design, they are meant to evolve over time through touch, air, and everyday use. Changes in tone, patina, and surface are natural and intentional, allowing each piece to develop a character unique to the space it inhabits.
Patina is not a defect, but an intentional part of the design. Handles are the handshake of a space — and living finishes allow that interaction to become visible. Like time-worn jewellery, our hardware records the passage of time and use.
Satin nickel has a soft, satin-matte surface from the outset. Over time, areas that are less touched may darken slightly, while frequent use can gently polish the surface, giving it a smoother and more reflective appearance.
Care:
Wipe with a soft, damp cloth. If exposed to moisture or oils, dry immediately with a soft cloth. Do not polish, as this will alter the satin finish.
Finish: Satin Nickel
Type: Appliance Pull / Cabinet Knob
Height: 80 mm / 3,15 inch
Width: 30 mm / 1.18 inch
Depth: 45 mm / 1,77 inch
weight: 377g
All our products are intentionally made with uncoated, living finishes and will naturally develop a beautiful patina over time and are therefore subject to a slight variation and opacification.
The products may show small variations and imperfections due to the artisanal processing technique involved in making each of our pieces.
We recommend the occasional use of a soft damp cloth to help preserve the finish. The polished finishes can be given a light polish to restore the original sheen.
This style is delivered with a small grub screw, an optional feature if you wish to prevent rotation by securing the base at two points. Screw the grub screw into the smaller, offset, second hole using a small tong. Make sure the pointy side is sticking out a couple of mm. When mounting the piece to the cabinetry, make sure it is straight in the desired position as you tighten it. The grub screw will sink into the material securing a fixed position. If you have a very hard/dense material, pre-drilling might be required, tighten the piece in place at the desired position to make a mark, remove the piece and then pre-drill where the mark is made.
